Subsoiler Points and Parts

ProductDimension Specification
1"X 2-1/2" X 12" JD SUBSOILER
12 in. x 2-1/2 in. x 1 in. Boot Type Subsoiler Point

SKU: #108025

12 in. x 2-1/2 in. x 1 in. boot type subsoiler point designed to break hard ground up to 2 ft. deep for water drainage and planting preparation.
Dimensions
Length - Overall
12 in.
Thickness
1 in.
Weight
9.02 lb
Specifications
Style
Boot Type
Type
Subsoiler Point
1" X 2" X 11" KMC SUBSOILER
11 in. x 2 in. x 1 in. Boot Type Subsoiler Point

SKU: #108033

11 in. x 2 in. x 1 in. boot type subsoiler point designed to break hard ground up to 2 ft. deep for water drainage and planting preparation.
Dimensions
Fits Shank Thickness
1 in.
Height
7-1/2 in.
Length - Overall
11 in.
Specifications
Style
Boot Type
Type
Subsoiler Point
1 X 2 1/2 X 12-LILLISTON
12 in. x 2-1/2 in. x 1 in. Bolt On Subsoiler Point

SKU: #108026

12 in. x 2-1/2 in. x 1 in. bolt on subsoiler point with two 5/8 in. bolt holes on 2-1/4 in. centers, designed for deep tillage and ground preparation.
Dimensions
Hole Size
5/8 in.
Hole Spacing
2-1/4 in.
Length - Overall
12 in.
Specifications
Hole Count
2
Measurement Method
center to center
Style
Bolt On
1 X 2-1/2 X 12" JD112 & KMC 116
12 in. x 2-1/2 in. x 1 in. Cast Iron Bolt On Subsoiler Point

SKU: #108024

12 in. x 2-1/2 in. x 1 in. cast iron bolt on subsoiler point with two 1/2 in. bolt holes on 3 in. centers. Fits John Deere 112 and KMC 116.
Dimensions
Hole Size
1/2 in.
Hole Spacing
3 in.
Length - Overall
12 in.
Specifications
Hole Count
2
Material
Cast Iron
Measurement Method
center to center
1 X 2-1/4 X 13-1/4-TAYLORWAY
13-1/4 in. x 2-1/4 in. x 1 in. Bolt On Subsoiler Point

SKU: #108028

13-1/4 in. x 2-1/4 in. x 1 in. bolt on subsoiler point with two 5/8 in. bolt holes on 3-1/2 in. centers, designed for deep tillage and ground preparation.
Dimensions
Hole Size
5/8 in.
Hole Spacing
3-1/2 in.
Length - Overall
13-1/4 in.
Specifications
Hole Count
2
Measurement Method
center to center
Style
Bolt On
1-1/4"X 1-3/4"X 10-7/8 KMC -WIDE
10-7/8 in. x 1-3/4 in. x 1-1/4 in. Boot Type Subsoiler Point

SKU: #108030

10-7/8 in. x 1-3/4 in. x 1-1/4 in. boot type subsoiler point designed to loosen compacted soil and improve water infiltration for healthier crops.
Dimensions
Length - Overall
10-7/8 in.
Pin Hole Size
3/8 in.
Thickness
1-1/4 in.
Specifications
Style
Boot Type
Type
Subsoiler Point
SUBSOILER PT 1"X 2-1/2"X
1 in. x 2-1/2 in. Subsoiler Point

SKU: #107058

1 in. x 2-1/2 in. subsoiler point designed for deep tillage, soil penetration, and subsoiler shank applications.
Dimensions
Weight
7.26 lb
Width - Overall
2-1/2 in.
Specifications
Type
Subsoiler Point
1-1/4" X 1-3/4 X 10-7/8" KMC
10-7/8 in. x 3/8 in. x 1-1/4 in. Boot Type Subsoiler Point

SKU: #108023

10-7/8 in. x 3/8 in. x 1-1/4 in. boot type subsoiler point designed to break hard ground up to 2 ft. deep for water drainage and planting preparation.
Dimensions
Diameter - Pin
3/8 in.
Length - Overall
10-7/8 in.
Thickness
1-1/4 in.
Specifications
Style
Boot Type
Type
Subsoiler Point
1 X 2 X 12-1/4 DEERE A17994
12-1/4 in. x 2 in. x 1 in. Bolt On Subsoiler Point

SKU: #108037

12-1/4 in. x 2 in. x 1 in. bolt on subsoiler point with three 5/8 in. bolt holes on 3 in. centers. Fits KMC and John Deere 120 narrow.
Dimensions
Hole Size
5/8 in.
Hole Spacing
3 in.
Length - Overall
12-1/4 in.
Specifications
Hole Count
3
Measurement Method
center to center
Style
Bolt On
1"X 1-1/4"X 11" KMC NARROW
11 in. x 1-1/4 in. x 1 in. Boot Type Subsoiler Point

SKU: #108029

11 in. x 1-1/4 in. x 1 in. boot type subsoiler point designed for KMC narrow shanks. Breaks hard ground up to 2 ft. deep for drainage and planting.
Dimensions
Diameter - Pin
3/8 in.
Length - Overall
11 in.
Thickness
1 in.
Specifications
Style
Boot Type
Type
Subsoiler Point
WEAR STRIP CAST STEEL TO FIT KMC
Wear Shin Cast Steel to Fit KMC

SKU: #15493

Cast steel wear shin designed to fit KMC subsoiler and ripper applications with three roll pin mounting holes.
Dimensions
Length - Overall
12 in
Thickness
1-3/8 in
Weight
3.87 lb
Specifications
Brand
Agmate
Color
Orange
Hole Count
3
WEAR STRIP TO FIT KMC W/
Wear Shin for KMC V-Ripper

SKU: #39580

Wear shin designed to fit KMC V-Ripper and Kelley Mfg subsoiler shanks. Direct replacement for worn or damaged wear strips.
Dimensions
Weight
3.8 lb
Specifications
Brand
Agmate
Color
Red
Hole Count
2
2-5/8" X 1/2" X 12" BLANTON
12 in. x 2-5/8 in. x 1/2 in. Bolt On Subsoiler Point

SKU: #108022

12 in. x 2-5/8 in. x 1/2 in. bolt on subsoiler point with two mounting holes on 2 in. centers. Fits KMC subsoiler shanks.
Dimensions
Hole Spacing
2 in.
Length - Overall
12 in.
Thickness
1/2 in.
Specifications
Color
Green
Hole Count
2
Measurement Method
center to center

Showing 13/13

Explore Related Collections

WEAR STRIP CAST STEEL TO FIT KMC
Wear Shins

2 items